FREE SHIPPING FOR ORDERS OVER $199
-Liquid error (snippets/product-snippet line 250): Computation results in '-Infinity'%
2018-2025 Jeep JL/JT 3.6L 850RE Heavy-Duty Cast Aluminum Transmission Pan
$319.99
In Stock
Temporarily out-of-stock
PART NUMBER:
228153500
GTIN:
840171224023
OEM P/N REFERENCE: JEEP 68362041AC
LIFETIME LIMITED WARRANTY
30-DAY RETURNS
- Description
- Compatible Vehicles
- RESOURCES
Jeep Wrangler JL/JT Transmission Pan, Heavy-Duty Cast Aluminum
Excessive heat kills transmission life. As temperature rises, transmission fluid viscosity decreases, weakening the lubricating film that protects gears and bearings. This could cause premature wear and potential failure.
Cast from high-grade A356.0-T6 aluminum alloy, the PPE transmission pan offers one quart of additional fluid capacity, ensuring long-lasting heat management and performance.
The deep external cooling fins maximize the heat-wicking surface area, effectively dissipating heat to keep your transmission cool under pressure. These fins also add strength to the bottom of the pan and enhance impact resistance.
The built-in baffles at the bottom of the pan increase contact between the fluid and the cast-aluminum surfaces, enhancing heat transfer. These baffles also reduce fluid sloshing, ensuring consistent fluid pickup and stable transmission performance. Together with the longitudinal external fins, they form a stiff, cross-bracing structure, distributing loads better and increasing impact resistance.
The factory plastic pan and its non-replaceable filter must be discarded with every fluid change. In contrast, a replaceable filter bolts directly inside the PPE pan, making fluid services easier and more cost effective. The PPE drain plug is equipped with a powerful, high-temperature-rated neodymium magnet that captures ferrous metal particles, providing additional protection for your transmission.
Keep your 8-speed running longer, healthier, and cooler with PPE.
Replacement filter SKU 228058700
The Jeep Wrangler 2.0L/3.6L (with 850RE transmission) and 3.0L/6.4L (with 8HP75 transmission) use the same OEM stamped steel pan and filter. This stamped steel pan uses a flat metal gasket with rubber over-mold.
PPE Cast Aluminum Transmission Pans, SKU 228153000, 228153400, and 228153500 are all compatible with the 850RE and 8HP75 transmissions in the Jeep Wrangler/Gladiator. These three pans have different depths and capacity gains. 228153000 has 2.2 quarts of additional capacity, offering maximum thermal capacity. 228153400 has 1.0 quart of additional capacity, offering better ground clearance. 228153500 has 1.0 quart of additional capacity, offering better ground clearance. Its external cooling fins are machined for clearance with the exhaust cross pipe in 3.6L V6 applications.
M
Go the brushed model and it looks great. Was quite easy to install on my 2023 Gladiator with the 3.6l and had had no issues. One heads up though when you are loosening the fill bolt on the transmission watch your knuckles. Once it breaks free it is super loose.
s
Good transmission pan, install wasn’t too hard. Didn’t notice any temperature difference in the trans temp I was hoping for, but at least I can now drain & fill my fluids without an entire pan removal each time.
J
Ordered pan and received fairly quickly. Installation instructions were straightforward but should be read thoroughly before beginning project. I would rate the installation as medium difficulty as the exhaust pipes need to be moved and it wasn’t easy laying on my back under the vehicle. I’m also not sure why they include a rubber gasket in the kit when the instructions state to use the oem gasket. Overall I’m very satisfied with the product as the drain plug in the new pan will make my next fluid change much smoother.
S
Super easy to install , they Ship direct from USA to My country Qatar,
Quality is perfect, notes a decries in temp. during dunes driving .
D
This pan was very easy to install on a 2019 Jeep Wrangler 2.0 L . It took about an hour and a half. This pan needed just a bit under 8 quarts of oil…it has the xtra 2.2 qt. capacity. I used a Harbor Freight transfer pump….it’s the 15 dollar one..get on You tube and watch the process for the fluid being put back. I emptied my used oil into a graduated paint bucket…just to make sure I put that back plus the pan new volume…very nice fit…and excellent quality…well worth the money
T
Nice pan with a drain plug. Kind of a pain to install since you have to remove the exhaust
J
Extra quart of fluid looks great do have to unbolt the exhaust to install it but it’s worth it
2021 jeep gladiator 3.6L
