FREE SHIPPING FOR ORDERS OVER $100
2011-2023 Ford 6.7L Heavy-Duty Cast Aluminum Oil Pan
$439.00
In Stock
Temporarily Out of Stock
PART NUMBER:
314052100
GTIN:
840171213492
LIFETIME LIMITED WARRANTY
30-DAY RETURNS
- Description
- Compatible Vehicles
- Downloads
- FAQ
- Reviews
Heavy-Duty Cast Aluminum Oil Pan
Cast from high-grade A356.0-T6 aluminum alloy and holding a full quart over stock, this pan is a perfect upgrade to the factory stamped steel or flimsy plastic versions. We’ve addressed the major issues associated with the original Ford factory oil pan. Deep external cooling fins radiate heat and help the engine operate at much cooler temperatures than the stock pan. Thanks to its thick, cast aluminum construction, external fins, and the addition of side gussets, this easy-to-install upgrade is much stronger and runs much cooler than the stock units.
The PPE Oil Pan Kit includes a hardened billet stainless steel drain plug which contains a powerful Neodymium magnet that attracts and holds ferrous metal particles, keeping them from damaging your engine’s vital internal components.
Recommendation Disclaimer
If using a copper washer SKU 114052002 on the drain plug, replace it with a new washer during each service.
If using a compound washer SKU 114052004, inspect the washer during each service and replace as needed.
Replaces Ford P/N BC3Z6695B
Files
Install Guide
Drawings
Q: How did PPE increase the oil capacity over the stock pan?
A: The PPE pan gains additional oil capacity by utilizing unused space under the engine while maintaining clearances. The PPE pan also has the same oil pickup relationship as the stock pan.
Q: Does the additional oil capacity of the PPE pan affect the dipstick oil level reading?
A: The increased volume of the PPE pan does not alter the oil level reading on the dipstick, thus retaining the stock reading.
Q: Why isn’t the drain plug facing down from the bottom of the pan?
A: The drain plug is in a location to protect and prevent catastrophic failure from events such as impacts from road debris or other objects. It is positioned for complete drainage during oil changes, unlike the stock pan which leaves about a 1/2 quart of contaminated oil, and sludge.
Q: Why not just overfill the engine with oil instead of installing a pan with more capacity?
A: Overfilling your vehicle with oil can cause aeration of the oil, which in turn can cause increased wear and engine damage.
Q: How much more oil does the PPE 6.7L Pan hold?
A: The PPE pan will hold approximately 1 full quart of oil over the stock pan. Always determine and verify the proper fill level by reading the dipstick.
Customers also bought
128051002
