FREE SHIPPING FOR ORDERS OVER $100
2020-2025 GM 6.6L Duramax Heavy-Duty Deep-Capacity Cast Aluminum Engine Oil Pan
$568.00
In Stock
Temporarily Out of Stock
PART NUMBER:
114053100
GTIN:
840171222302
LIFETIME LIMITED WARRANTY
30-DAY RETURNS
- Description
- Compatible Vehicles
- Downloads
- FAQ
- Reviews
Heavy-Duty Deep-Capacity Cast Aluminum Engine Oil Pan
PPE solves the GM Duramax L5P complete oil drainage problem. During regular oil changes, the stock GM pan retains over half a quart of the dirtiest, heaviest part of the oil which settles to the bottom of the valley of the stock pan. This old oil is trapped in the valley of the stock pan and never drains out. It immediately contaminates your fresh oil.
The PPE Oil Pan's flat, angled bottom design and drain port placement enable complete oil drainage and better engine protection. The profile of the pan is carefully engineering to maximize its internal volume while maintaining all critical dimensions. As a result, the oil capacity is increased by 2.0 quarts, which also increases the thermal stamina and prevents overheating. Engine oil temperatures are further reduced because the PPE L5P Oil Pan is constructed of high-strength, durable A356.0-T6 aluminum alloy. The casting process utilizes permanent steel molds for improved precision and appearance compared to traditional sand casting.
The PPE L5P Oil Pan is equipped with air channels across the bottom of the pan to increase its external surface area, radiating heat more efficiently. The cast-in triangular gussets provide added strength and rigidity to the flange area. Two deep ribs run across the mid-section inside the pan, vastly strengthening its structural integrity. There are also CNC machined sealant grooves around the flange surface for better and easier sealing.
A powerful neodymium magnet-equipped, precipitation hardened 17-4 stainless steel drain plug is included to pull ferrous metals out of your oil before they can damage the internals. This provides additional protection to your engine internals and extend the oil life.
Replace your factory stamped-steel oil pan and get rid of the dirty oil that you've been holding on to. Give your L5P a fresh, clean start with this simple bolt-on upgrade.
Recommendation Disclaimer
If using a copper washer SKU 114052002 on the drain plug, replace it with a new washer during each service.
If using a compound washer SKU 114052004, inspect the washer during each service and replace as needed.
Replaces GM P/N 12725600, 12675087
Files
Install Guide
Drawings
Q: How did PPE increase the oil capacity over the stock pan?
A: The PPE pan gains additional oil capacity by utilizing unused space under the engine while maintaining clearances. The PPE pan also has the same oil pickup relationship as the stock pan.
Q: Does the additional oil capacity of the PPE pan affect the dipstick oil level reading?
A: The increased volume of the PPE pan does not alter the oil level reading on the dipstick, thus retaining the stock reading.
Q: Why isn’t the drain plug facing down from the bottom of the pan?
A: The drain plug is in a location to protect and prevent catastrophic failure from events such as impacts from road debris or other objects. It is positioned for complete drainage during oil changes, unlike the stock pan which leaves about a 1/2 quart of contaminated oil, and sludge.
Q: Why not just overfill the engine with oil instead of installing a pan with more capacity?
A: Overfilling your vehicle with oil can cause aeration of the oil, which in turn can cause increased wear and engine damage.
Q: How much more oil does the PPE 6.6L Duramax Pan hold?
A: The PPE pan will hold approximately 2 quarts of oil over the stock pan. Always determine and verify the proper fill level by reading the dipstick.
