2006-2010 GM 6.6L Duramax Silicone Hose #3+4 (c)

2006-2010 GM 6.6L Duramax Silicone Hose #3+4 (c)

$85.00 In Stock Temporarily Out of Stock
PART NUMBER: 115900800 GTIN: 840171207361


  • Working pressure: 70 psi - BAR 4.8
  • Burst pressure: 207 psi - BAR 14.3
  • UV and Ozone resistant
  • Handles high boost-pressures, oil and fuel, high-temperatures
  • Higher flow and better lubricity than rubber
  • 5-ply, 6mm wall thickness
  • Compatible with PPE T-Bolt Clamp 3.5" (515350300)



  • Description
  • Compatible Vehicles
  • Reviews

Each PPE Performance Silicone Hose is strengthened with 5 plies of Nomex reinforced fibers making them very tough. Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures they can withstand constant boost pressures and temperatures from -76 degrees all the way to +437 degrees Fahrenheit. PPE silicone will maintain structural integrity even when subject to high boost pressures throughout the temperature range. In short, PPE Performance Silicone Hoses will not blow out as a stock hose will.

PPE’s Silicone Hoses are resistant to fuel, oil, and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usage puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application.

Drag racing and sled pulling place huge stress on your truck’s silicone hoses in a very short period of time. PPE's hoses were designed to handle the rigors of increased pressures during racing and competition. Their performance tolerances make them an excellent upgrade for your daily driving and the extremes of towing heavy loads.

Note: Due to the 6mm wall thickness, hose clamps must be 1/2 inch larger in diameter than hose ID for proper fit.

Compatible  with PPE T-Bolt Clamp 3.5" (515350300)

GM Equivalent P/N: 15102148


Recently Viewed